Mesh emulsion frame
Mesh
We offer a wide variety of mesh including stainless steel, polyester and plated mesh.
Stainless Steel Mesh
ST Series
- This is a plain weave mesh made of stainless steel wire with excellent printability and a proven track record.
- A wide variety is available, from 70 mesh for thick coating to 900 mesh for fine patterns.
- Discharge volume can be adjusted by calendering.
SX Series
- Compared to conventional stainless steel mesh, it has three times the tensile strength and 1/8 the elongation, which are extremely superior characteristics.
- This mesh for fine patterns utilizes this characteristic of the wire itself to ensure a high aperture ratio with ultrafine wires.
- Even high-viscosity paste can be easily printed with low printing pressure, enabling patterning with excellent shape accuracy.
- Twill weaving is also available.
Plating Mesh
- By plating the above metal mesh and fixing the intersection points, the amount of gauze elongation is minimized.
- It is effective for printing that requires high dimensional accuracy.
- By controlling the plating thickness, the dispensing volume can be more finely adjusted.
Polyester mesh
- This is a cost-effective mesh with a high modulus of elasticity and good following to circuit boards.
- It is used in a wide range of fields such as printed circuit boards, flexible circuit boards, and membrane sheets.
Other special mesh
- Tungsten mesh
- V-Screen
- Mesh Metal Mesh
emulsion
The following is a summary of the characteristics of emulsions used for screen masks. Please use it as a reference when selecting an emulsion.
| Product name | Features | Resolvability | Smoothness | Solvent resistance | Abrasion resistance | Followability |
|---|---|---|---|---|---|---|
| NOA | This is the standard emulsion of Takeda Topro. Excellent resolution, abrasion resistance, and solvent resistance. High durability against polar solvents It can be used in a wide range of fields. |
 |
|
 |
|
|
| ARK | This emulsion is based on NOA with a softer emulsion hardness. Prevents cracks in the plate film caused by the corners of the circuit board hitting the board. |
|
|
|
|
|
| ARK4 | This emulsion has excellent resolution and high batten straightness. Suitable for fine line patterns. |
|
|
|
|
|
| ARK55 | Emulsion with excellent smoothness and abrasion resistance. Suppresses ghost blurring in thin-film printing. |
|
|
|
|
|
| NSL | Unpigmented emulsion. Excellent resistance to polar solvents and other specific solvents. |
|
|
|
|
|
| PAL | Emulsion developed for LTCC printing. The softness of the plate film prevents ghosts from penetrating to the reverse side of the plate film, resulting in good print resolution. |
|
|
 |
|
|
| NCS | Emulsion developed for MLCC printing. Prevents blurring of MLCC paste. The plate film hardness is soft and durable. |
|
|
|
|
|
| TAP3 | Emulsion developed for thick film plate making. | |
|
|
|
|
| G3 | Emulsion developed for water-soluble paste printing. Combination with hard film treatment further improves water resistance and prevents emulsion swelling. |
|
|
|
|
|
| T3 | This emulsion can be used for a wide variety of applications, including solid pattern printing. | |
|
|
|
|
| T4 | It is a multi-performance emulsion that can be used for 100 µm wiring patterns. | |
|
|
|
|
| T5 | This emulsion has excellent resolution and can be used for fine patterns such as 50um. It also has excellent solvent resistance. |
|
|
|
|
|
Frame (plate frame)
The selection of the screen frame is important to achieve high precision screen printing. We have a variety of frames other than general-purpose sizes.
| Generic Frame size |
Frame name and dimensions (H x W x t) | |||||||
|---|---|---|---|---|---|---|---|---|
| Castings | Pipe material/strength: weak to strong | |||||||
| B material | C material | SPC4 | I material | SPCK | SPHK | SPK | ||
| – | 20×30×1.5 | 30×40×2.0 | 30×40×3.0 | 30×50×2.74 | 30×42×5.0 （4.0） |
30×60×4.0 （3.0） |
40×80×3.0 | |
| 320×320 | ○ | ○ | ||||||
| 380×380 | ○ | ○ | ||||||
| 450×450 | ○ | ○ | ||||||
| 550×550 | ○ | ○ | ○ | ○ | ||||
| 550×650 | ○ | ○ | ○ | ○ | ||||
| 650×750 | ○ | ○ | ○ | ○ | ○ | |||
| 750×750 | ○ | ○ | ○ | ○ | ○ | |||
| 800×800 | ○ | ○ | ○ | ○ | ○ | |||
| 950×950 | ○ | ○ | ○ | ○ | ○ | |||
| 1000～ | ○ | ○ | ○ | ○ | ||||
We can manufacture various types of masks starting from a single sheet.
Are you looking to have a single prototype piece made? We are equipped to flexibly accommodate small lot orders and other requests. Please do not hesitate to contact us.